PR electronics 3113 HART 7 temperature converter - isolated

PR electronics 3113 HART 7 temperature converter - isolated

Model: 3113

Supplier: Products

Categories: PR electronics

Please contact us for more information.

PRODUCT DESCRIPTION



We promise 100% original brand new with 1-year warranty.

If you are interested in our products, please feel free to contact us!

-----------------------------------------------------------

HONGKONG XIEYUAN TECH CO., LIMITED

Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan, China

Contact: Ms. Lily

Email: lily@hkxytech.com

WhatsApp/Skype: +86 13789949182



3111




HART 7 temperature converter - isolated

 


  • High accuracy, better than 0.05% of span

  • Slimline housing of 6 mm

  • Excellent EMC performance

  • Selectable 60 ms / 60 s response time

  • Pre-calibrated temperature ranges selectable via DIP-switches




Application

  • The 3113 temperature converter measures a standard Pt100, TC J and K temperature sensor, and provides an isolated active analog current and HART signal output.

  • High 3 port isolation provides surge suppression and protects the control system from transients and noise.

  • The 3113 can be mounted in the safe area or in Zone 2 / Division 2 areas.

  • Approved for marine applications.



Technical characteristics

  • Flexibly powered by 24 VDC (±30%) via power rail or connectors.

  • A 60 ms fast response time with simultaneous sensor error detection when selected.

  • Selectable internal/external CJC.

  • Excellent conversion accuracy in all available ranges, better than 0.05% of span.

  • Meeting the NAMUR NE21 recommendations, the 3113 provides top measurement performance in harsh EMC environments.

  • The device meets the NAMUR NE43 standard defining out of range and sensor error output values.

  • A visible green LED indicates operational status of the unit and the input sensor.

  • All terminals are protected against overvoltage and polarity error.

  • High galvanic isolation of 2.5 kVAC.

  • Excellent signal/noise ratio of > 60 dB.




Mounting / installation / programming

  • Selectable HART mode with HART 7 revision protocol enables extended device programming.

  • Selectable DIP-mode for easy configuration of more than 1000 factory calibrated measurement ranges with HART read only feature.

  • The narrow 6 mm housing allows up to 165 units to be mounted per meter of DIN rail, without any air gap between units.

  • Wide ambient temperature range of -25...+70°C.


Related Products